NH3 Application Specialists
Blackbird SR71 Liquid NH3 Injection Using Exactrix Technologies
- Designed for VR (variable rate application) apply NH3 as streaming liquid through the manifolds in uniform bands
- No freezing boots or lines with TIO’s (terminal injection orifices)
- Improved accuracy at faster application speeds in cold weather
- Using Exactrix components & technology with injection pressures just above tank pressure
- The Blackbird is adaptable to most controllers (Dickey-john Land Manager, Raven, Tee jet and including ISO-Bus. John Deer GS-2, Case IH Pro 600&700,Trimble and Agco)
- Requires about 3-5 gallons of hydraulic flow nominal for most applicators
- Sponsler SS flow meters with 1% CV between 2 to 18 gpm is more reliable since they are designed for pump pressure applications and can regulate at 20 pounds N per acre on 60 feet at 5 mph about 2.5 gallons per minute NH3 to 20 gallons per minute in 3 seconds. Excellent for VR site specific application and sectional control
- Corken 2” PD pump which has years of reliable experience in industrial applications
ie: NH3 & Propane plants and delivery trucks - Max application rate based on adequate Anhydrous Ammonia flow to the 2” Corken pump ie: 60ft of Applicator 6.5 mph, 110lbs actual lbs N per acre (20gpm NH3) and apply as low as 15lbs/acre (2.8GPM NH3). Where higher application rates are required upgrades can be made to the base module
NH3 Product Lines:
1: Continental NH3
2: Dickey-john
3: Raven
4: Squibb Taylor
5: Goodall NH3 Hose
