Using Exactrix Technology
- Using Exactrix Technology
- Direct pressure injection system
- Variable rate response apply liquid through the manifold
- No freezing lines... with terminal injection orifices
- Improved accuracy in cold weather
- Many components come from Exactrix
- Requires about 5 gallons of hydraulic flow nominal
- A major breakthrough in the application of NH3 and with the assurance of long-term use
- Precision accuracy, safety, economic crop response and significant environmental improvements in the use of NH3
Rate controller compatibility with John Deer GS2, Topcon X30, Case IH, Dickey-John Intelliag, Land Manager and Raven Systems
The Blackbird
1. Designed for VR (variable rate application) apply NH3 as liquid through the manifolds in uniform bands 1% CV
2. No freezing boots or lines with TIO's (temlinal injection orifices)
3. Improved accuracy at faster application speeds in cold weather
4. Using Exactrix™ components & technology with injection pressures just above tank pressure
5. The Blackbird is adaptable to most controllers (Topcon X30, Dickey John, IntelliAg & Land Manager, Raven Systems, Tee jet and including ISO-Bus, John Deer GS-2, Case IH Pro 600&700 and AgCo)
6. Requires about 3-5 gallons of hydraulic flow nominal for most applicators
7. Sponsler SS flow meters with 1% CV between 2 to 18 gpm is more reliable since they are designed for pump pressure applications and can regulate at 20 pounds N per acre on 60 feet at 5 mph about 2.5 gallons per minute NH3 to 18 gallons per minute in 3 seconds. Excellent for VR site specific application
8. Corken 2" PD pump which has years of reliable experience in industrial applications ie: NH3 & Propane plants and delivery trucks
9. Max application rate based on adequate Anhydrous Ammonia flow to the 2" Corken pump ie: 60ft of Applicator 5 mph, 1251bs actual lbs N per acre (18gpm NH3) and apply as low as 201bs/acre (2.87GPM NH3), Where higher application rates are required upgrades can be made to the base model
Blackbird NH3 pressure system materials list:
- 2" Corken pump and modulation valve hydraulic driven clw mounting base
- Sponsler 3/4" industrial flow meter with 1% CV between 2 to 18 gpm
- Eaton hydraulic components
- Strainer 40 mesh 1/2 gallon reservoir
Options Available:
- Manifolds clw shut off valves
- TlO orifices and manifold orifice adaptors
- 1/8npt for 3/16 hose barb & collars
- 3/16 od x .137 id black line loom
- conductors in 15 foot lengths with corrugated protection covers
- 15ft 1/2" Red Hose to feed manifolds
- Additional manifold lines, adaptors & TIO's
- Sectional controller valves 1/2" 12VDC .8 sec cycle time (requirement for variable rate response time)
- Manual sectional control .8 sec cycle time
- GPS Sectional control .8 sec cycle time
